3PL

How Much Should a 3PL Mark Up Shipping? A 2027 Guide

DiFi Team
November 15, 2026
min read

Published guidance puts typical 3PL shipping markups anywhere from about 5% to 30% over carrier cost. DiversiFi's view is that the right markup is not a single percentage. Profitable 3PLs price shipping by weight break, zone, and service, set a minimum margin per package, and decide separately how surcharges pass through. A flat percentage on the base rate is the most common way 3PLs end up earning far less than they think.

This guide covers the three common shipping pricing models, why a flat markup leaks margin, and how to set markups that hold up through the 2027 rate increases.

What Are the Common Ways 3PLs Charge for Shipping?

Almost every 3PL uses one of three models, or a blend of them:

  • Pass-through plus a service fee. The client pays the carrier cost, and the 3PL earns a flat per-label or per-order fee. Transparent and easy to audit, but the 3PL earns nothing on its negotiated carrier discount.
  • Percentage markup. The 3PL adds a fixed percentage to its carrier cost. Simple to explain and simple to configure in most WMS and shipping tools, which is why it is so common. It is also the model that leaks the most margin, as shown below.
  • Rate card pricing. The 3PL publishes fixed sell rates by service, weight, and zone, built from its own carrier costs. This takes more setup, but it lets the 3PL decide exactly where it earns margin and where it competes on price.

There is a fourth arrangement that is really an absence of a model: shipping on the client's own carrier account. Several 3PL operators DiversiFi spoke with this fall bill shipping this way. It removes billing work, but it leaves no margin to absorb a carrier adjustment, a reweigh, or an address correction, and it gives the 3PL nothing to earn from its own carrier relationships.

How Much Should a 3PL Mark Up Shipping?

Brand-side pricing guides report markups of roughly 5% to 25%, with some analyses citing 15% to 30% at large national fulfillment networks. Those numbers are a starting point, not an answer, because the same percentage produces very different margins depending on what it is applied to.

Three questions set the right markup for a given client:

  1. What is your actual carrier cost on this client's profile? Not your average discount. The cost on this client's real weights, zones, and services, including minimums and surcharges.
  2. What does the client compare you to? A brand shipping 1 lb parcels to Zone 2 will compare your rate to what it can get alone. A brand shipping 20 lb cartons cross-country rarely can.
  3. How much risk are you carrying? If you guarantee rates for the contract term or ship on your own accounts, your markup has to cover adjustments, reweighs, and rate increases that land mid-contract.

Why Does a Flat Percentage Markup Leak Margin?

Because most of the cost on a residential parcel is not the base rate. Take a simple example using UPS 2027 published surcharges:

  • Carrier base rate on a light Ground residential parcel: $8.50
  • UPS Ground Residential Surcharge in 2027: $7.10
  • Total carrier cost before fuel: $15.60

A 15% markup applied only to the base rate earns $1.28. Measured against the full $15.60 cost, that is an effective margin of about 8%, roughly half of what the rate card says. Add a delivery area surcharge or an address correction passed through at cost and the effective margin drops further.

Flat percentages also break in the other direction. On heavy, long-zone shipments a 15% markup can price you out of a bid where a lower percentage on a much larger dollar amount would still be very profitable. The result is a familiar RFP pattern: a 3PL loses the deal on its heaviest lanes and wins it on its lightest, the opposite of where it makes money.

How Should 3PLs Structure Shipping Markups Instead?

  • Mark up by weight break and zone. Light, short-zone parcels face the most price competition, so a thinner percentage with a dollar floor works there. Heavier and longer-zone parcels can carry more margin because clients have fewer alternatives.
  • Set a minimum dollar margin per package. A percentage of a small number is a small number. A fixed dollar floor per label, set from your own cost to ship, protects light-package volume, which is also where the 2027 carrier increases are steepest.
  • Decide surcharge pass-through on purpose. Pass residential, delivery area, and Additional Handling charges through at cost plus a defined markup, or build them into the rate card. Do not leave them at cost by default.
  • Reprice when carriers reprice. UPS raises rates on December 21, 2026 and FedEx on January 4, 2027, with most common surcharges rising faster than base rates. A markup set against 2026 costs is a smaller markup in 2027.
  • Benchmark against the market, not your gut. Compare your sell rates to what similar 3PLs charge on the same weight and zone before you send a proposal.

Should a 3PL Use Its Own Carrier Accounts or the Client's?

Your own accounts, for most clients. Shipping on your accounts lets you earn on the discount your total volume negotiates, lets you route each package to the best carrier, and puts the billing data in your hands. The tradeoff is responsibility: the carrier bills you, so every adjustment, reweigh, and correction has to be caught and passed through, or you absorb it.

Client accounts make sense for very large shippers with better rates than you can offer, or for brands that insist on it. In those cases, charge a clear per-label service fee so the work of managing the shipment is still paid for.

How DiversiFi Helps 3PLs Set Shipping Markups

DiversiFi BidBoost cleans a prospect's shipping data, applies your real carrier costs, and lets you set dynamic markups by weight break, zone, and service while comparing your sell rates against market benchmarks. You see the margin on every shipment before the proposal goes out.

DiversiFi AI Dynamic Billing then applies those markups to every shipment, passes surcharges through by the rules you set, and reconciles carrier invoices before client invoices are sent, so the margin you quoted is the margin you keep.

For a deeper look at how pricing ties into winning deals, see our guide on winning RFPs without sacrificing margin. If you want to see what your current markups actually earn on your shipment profile, DiversiFi offers free cost modeling.

In this article

Frequently asked questions

How often should a 3PL review its shipping markups?

At least every time carriers change rates. With UPS raising rates on December 21, 2026 and FedEx on January 4, 2027, markups set against 2026 carrier costs will earn less in 2027 unless they are repriced.

Is it better for a 3PL to ship on its own carrier accounts?

For most clients, yes. Shipping on the 3PL's own accounts lets it earn on its negotiated discounts and route each package to the best carrier, but the 3PL must catch and pass through every carrier adjustment. Client accounts suit very large shippers with better rates; charge a per-label fee in that case.

Should 3PLs mark up carrier surcharges?

Yes, or build them into the rate card. Passing residential, delivery area, and Additional Handling surcharges through at cost can cut a 3PL's effective shipping margin roughly in half on residential parcels, because surcharges make up a large share of total carrier cost.

What is a typical 3PL shipping markup?

Brand-side pricing guides report 3PL shipping markups of roughly 5% to 25% over carrier cost, with some large fulfillment networks at 15% to 30%. DiversiFi recommends setting markups by weight break, zone, and service rather than one flat percentage.

See AI for your 3PL In Action

Discover how our solutions can drive your success.

Get a Demo